Hi.
After many test on rfid (PN532,522 RDM6300) sometimes the reading delay is not OK or the distance is too small
I finaly find a correct reader :
It's an old Phidgets PN1023 (now replace by PN1024)
It's USB device so i connect it to the Raspberry PI.
[attachment=5457]pi connection.jpg[/attachment]
The Prototype box
[attachment=5458]20181111_152132.jpg[/attachment]
The next box need to be 3D printed.
And the first test result in video :
The reading is OK when the tag is underground:
https://youtu.be/F2UFJ1DNCJk
The fast return to station:
https://youtu.be/s9w-ZZbiVvc
The tag can be use to reduce speed just before docking.
The Island exit is also solved.
And i want to test this to mow on different Wired area (The mower leave totaly the perimeter to find other perimeter area but it's other topic).
By.
After many test on rfid (PN532,522 RDM6300) sometimes the reading delay is not OK or the distance is too small
I finaly find a correct reader :
It's an old Phidgets PN1023 (now replace by PN1024)
It's USB device so i connect it to the Raspberry PI.
[attachment=5457]pi connection.jpg[/attachment]
The Prototype box
[attachment=5458]20181111_152132.jpg[/attachment]
The next box need to be 3D printed.
And the first test result in video :
The reading is OK when the tag is underground:
https://youtu.be/F2UFJ1DNCJk
The fast return to station:
https://youtu.be/s9w-ZZbiVvc
The tag can be use to reduce speed just before docking.
The Island exit is also solved.
And i want to test this to mow on different Wired area (The mower leave totaly the perimeter to find other perimeter area but it's other topic).
By.