Hallo, ich bin neu im Forum und ich möchte folgendes Problem fragen :
In Configuration (arduino IDE 1.0.5 r2 ), wählen DIY:
//#include "rmrl500.h" // Robomow RL500
#include "romeo11.h" // Individual mower configuration (DIY)
//#include "aml50.h" // Ambrogio L50
//#include "stepperbox.h" // Stepperbox
//#include "tcg158.h" // Tianchen TC-G158 (Güde etc.)
//#include "spm12320.h" // Supoman SPM12-320 (Rotenbach etc.)
Ich werde dann kompilieren und erhalten eine Reihe von Fehlern :
In file included from ardumower.ino:72:
/romeo11.h: In function 'void config()':
romeo11.h:136: error: 'useMotorMow' was not declared in this scope
romeo11.h:137: error: 'useMotorMowBLDC' was not declared in this scope
romeo11.h:139: error: 'MOTOR_MOW_OFF' was not declared in this scope
romeo11.h:147: error: 'useMotorSense' was not declared in this scope
romeo11.h:151: error: 'useMotorMowSense' was not declared in this scope
romeo11.h:155: error: 'useBatteryMonitoring' was not declared in this scope
romeo11.h:164: error: 'usePerimeter' was not declared in this scope
romeo11.h:168: error: 'useLawnSensor' was not declared in this scope
romeo11.h:173: error: 'useButton' was not declared in this scope
romeo11.h:177: error: 'useBumper' was not declared in this scope
romeo11.h:184: error: 'useBuzzer' was not declared in this scope
romeo11.h:188: error: 'useTilt' was not declared in this scope
romeo11.h:192: error: 'useSonar' was not declared in this scope
romeo11.h:200: error: 'useRemoteRC' was not declared in this scope
romeo11.h:205: error: 'useIMU' was not declared in this scope
romeo11.h:206: error: 'initL3G4200D' was not declared in this scope
romeo11.h:207: error: 'initADXL345B' was not declared in this scope
romeo11.h:208: error: 'initHMC5883L' was not declared in this scope
romeo11.h:211: error: 'useRemoteRC' was not declared in this scope
/romeo11.h: In function 'int readSensor(char)':
romeo11.h:235: error: 'SEN_LAWN' was not declared in this scope
romeo11.h:239: error: 'useBatteryMonitoring' was not declared in this scope
romeo11.h:240: error: 'BATTERY_FAC' was not declared in this scope
romeo11.h:247: error: 'useBatteryMonitoring' was not declared in this scope
romeo11.h:248: error: 'chargeSenseZero' was not declared in this scope
romeo11.h:248: error: 'CHARGE_FAC' was not declared in this scope
romeo11.h:264: error: 'useURM37' was not declared in this scope
romeo11.h:267: error: 'useHCSR04' was not declared in this scope
romeo11.h:273: error: 'SEN_ACCEL' was not declared in this scope
romeo11.h:274: error: 'readADXL345B' was not declared in this scope
romeo11.h:276: error: 'SEN_GYRO' was not declared in this scope
romeo11.h:277: error: 'readL3G4200D' was not declared in this scope
romeo11.h:279: error: 'SEN_COMPASS' was not declared in this scope
romeo11.h:280: error: 'readHMC5883L' was not declared in this scope
romeo11.h:283: error: 'useMotorSense' was not declared in this scope
romeo11.h:284: error: 'motorRightSenseZero' was not declared in this scope
romeo11.h:291: error: 'useMotorSense' was not declared in this scope
romeo11.h:292: error: 'motorLeftSenseZero' was not declared in this scope
/romeo11.h: In function 'void setActuator(char, int)':
romeo11.h:308: error: 'useMotorMowBLDC' was not declared in this scope
Was mache ich falsch? Vielen Dank und Entschuldigung für schlechtes Deutsch.
Alex
In Configuration (arduino IDE 1.0.5 r2 ), wählen DIY:
//#include "rmrl500.h" // Robomow RL500
#include "romeo11.h" // Individual mower configuration (DIY)
//#include "aml50.h" // Ambrogio L50
//#include "stepperbox.h" // Stepperbox
//#include "tcg158.h" // Tianchen TC-G158 (Güde etc.)
//#include "spm12320.h" // Supoman SPM12-320 (Rotenbach etc.)
Ich werde dann kompilieren und erhalten eine Reihe von Fehlern :
In file included from ardumower.ino:72:
/romeo11.h: In function 'void config()':
romeo11.h:136: error: 'useMotorMow' was not declared in this scope
romeo11.h:137: error: 'useMotorMowBLDC' was not declared in this scope
romeo11.h:139: error: 'MOTOR_MOW_OFF' was not declared in this scope
romeo11.h:147: error: 'useMotorSense' was not declared in this scope
romeo11.h:151: error: 'useMotorMowSense' was not declared in this scope
romeo11.h:155: error: 'useBatteryMonitoring' was not declared in this scope
romeo11.h:164: error: 'usePerimeter' was not declared in this scope
romeo11.h:168: error: 'useLawnSensor' was not declared in this scope
romeo11.h:173: error: 'useButton' was not declared in this scope
romeo11.h:177: error: 'useBumper' was not declared in this scope
romeo11.h:184: error: 'useBuzzer' was not declared in this scope
romeo11.h:188: error: 'useTilt' was not declared in this scope
romeo11.h:192: error: 'useSonar' was not declared in this scope
romeo11.h:200: error: 'useRemoteRC' was not declared in this scope
romeo11.h:205: error: 'useIMU' was not declared in this scope
romeo11.h:206: error: 'initL3G4200D' was not declared in this scope
romeo11.h:207: error: 'initADXL345B' was not declared in this scope
romeo11.h:208: error: 'initHMC5883L' was not declared in this scope
romeo11.h:211: error: 'useRemoteRC' was not declared in this scope
/romeo11.h: In function 'int readSensor(char)':
romeo11.h:235: error: 'SEN_LAWN' was not declared in this scope
romeo11.h:239: error: 'useBatteryMonitoring' was not declared in this scope
romeo11.h:240: error: 'BATTERY_FAC' was not declared in this scope
romeo11.h:247: error: 'useBatteryMonitoring' was not declared in this scope
romeo11.h:248: error: 'chargeSenseZero' was not declared in this scope
romeo11.h:248: error: 'CHARGE_FAC' was not declared in this scope
romeo11.h:264: error: 'useURM37' was not declared in this scope
romeo11.h:267: error: 'useHCSR04' was not declared in this scope
romeo11.h:273: error: 'SEN_ACCEL' was not declared in this scope
romeo11.h:274: error: 'readADXL345B' was not declared in this scope
romeo11.h:276: error: 'SEN_GYRO' was not declared in this scope
romeo11.h:277: error: 'readL3G4200D' was not declared in this scope
romeo11.h:279: error: 'SEN_COMPASS' was not declared in this scope
romeo11.h:280: error: 'readHMC5883L' was not declared in this scope
romeo11.h:283: error: 'useMotorSense' was not declared in this scope
romeo11.h:284: error: 'motorRightSenseZero' was not declared in this scope
romeo11.h:291: error: 'useMotorSense' was not declared in this scope
romeo11.h:292: error: 'motorLeftSenseZero' was not declared in this scope
/romeo11.h: In function 'void setActuator(char, int)':
romeo11.h:308: error: 'useMotorMowBLDC' was not declared in this scope
Was mache ich falsch? Vielen Dank und Entschuldigung für schlechtes Deutsch.
Alex