Diodes with PCB kit

[jonathanbyrn]

Hi,
I have been building my ardumower and has been progressing well until I got to the diodes section. The build instructions (and video) list 4 MBR1045 diodes but there are only 3 in the bag that was sent with the kit. Do I need 4?

There was no 15ke or 1n5059 diodes in supplied electronics for the PCB 24 volt version. Do I need them?

And finally RR1 and RR2 do not fit on the PCB (see attached image) is it the wrong part or do I have to cut off a leg?

 

[markus-lbon-facebook]

Hello,

sorry for my bad English

RR1 and RR2 must be adjusted. see image

MBR1045 D3
The diode is only used with the charging system from the shop .
If you use this charger you do not need it.

Markus

Attachment: https://forum.ardumower.de/data/media/kunena/attachments/945/20161222_1610221.jpg/

 

[jonathanbyrn]

Brilliant, thanks for getting back to me so quickly! I will get soldering now!