connectors for bluetooth module

[jonathanbyrn]

Hi,
The pins on my bluetooth board do not match the inputs on the PCB (see attached picture).

The instructions show the bluetooth module connected directly to the board: http://wiki.ardumower.de/images/4/4c/Pcb_bluetooth.jpg

Should I ignore what is written on the PCB or should I match the specified inputs with additional cables?

 

[nero76]

Hi,

The PCB printed pinout has to be matched (e.g. using additional cables if your bluetooth module pinout is different). Also, you might want to look at the schematics too: http://wiki.ardumower.de/index.php?title=Ardumower_PCB#PCB_building_manual
Regards,
Alexander

 

[jonathanbyrn]

Thanks for the advice! I will trust the schematics over the images

 

[bernard]

Hi Jonathan.
You can use the second possibility of the board just on the right on your picture.
The mark on your PCB are Under the big Capacitor.
And all match correctly.

Like that it's work very well.

By
Attachment: https://forum.ardumower.de/data/media/kunena/attachments/3545/WP_20160617_001_2017-01-16.jpg/

 

[jonathanbyrn]

I didnt see the other connections under my capacitors. That is perfect, thanks for your help!